Plasterers in Filton Bristol

B&D Plastering Bristol, Quality You Can See

B&D Plastering are experienced plasterers in Filton, covering the whole area from the inter-war residential streets in the heart of the town through to the Charlton Hayes development on the former aerodrome site. Filton is a regular part of our South Gloucestershire service area and a location we know well.

What makes Filton genuinely different from neighbouring areas is the range of property ages within a small geography. The 1930s and 1940s semi-detached houses that line much of Filton’s residential streets sit close to some of the newest homes in South Gloucestershire on the Charlton Hayes development. A 1938 bay-fronted semi and a 2018 Charlton Hayes new build require completely different plastering approaches. Knowing which materials and methods suit which property is a matter of experience, and it is something we take seriously on every job in Filton.

This page covers our plastering services for Filton homeowners. For damp proofing or condensation treatment, we have separate pages for those services. Call Dave on 07754 246 461 for a free, no-obligation quote. We are available Monday to Saturday, 7am to 8pm.

B & D plastering logo

Contact Dave, B&D Plastering in Filton

Phone: 07754 246 461
Email: bdplaster@hotmail.com
Available: Monday to Saturday, 7am to 8pm

British Gypsum Certified | Fully Insured – up to £5M Public Liability | 5-Star Google & Facebook Reviews

Free, no-obligation quotes | No job too big or small – residential & commercial

Experienced & Reliable

Years of experience across both domestic and commercial sectors.

Fully Insured

We carry full Public Liability Insurance for peace of mind.

Top Quality Materials

We only use the best materials on every job.

Locally Trusted

A strong local reputation across Bristol, South Gloucestershire & beyond.

Plastering Services in Filton

Here is how our services as plasterers in Filton apply to the distinct range of properties across the area. Filton has a wider spread of property types than most locations of comparable size, and we adapt our approach accordingly.

Artex Ceiling Removal and Re-skimming

As plasterers in Filton, Artex ceiling removal is among the most requested jobs we carry out across the area. This reflects Filton’s housing history directly. Many of the 1930s and 1940s semis had their ceilings textured during renovation work in the 1970s and 1980s, when Artex was applied over original plaster ceilings. Additionally, some of the 1950s and 1960s properties had Artex applied to plasterboard replacement ceilings during the same period.

The result is that a large proportion of Filton’s older housing stock has textured ceilings that homeowners now want removed. We assess each ceiling before advising on the right approach:

  • Overboarding and re-skimming: Often the best option where Artex was applied directly to an existing plaster or plasterboard ceiling. A fresh layer of plasterboard fits over the top and skims smooth, leaving a clean flat ceiling without disturbing the Artex beneath.
  • Skimming over Artex: For lighter, more uniform textures. A skim coat builds over the surface to produce a flat finish. We assess whether the texture depth makes this viable before recommending it.
  • Full Artex removal: For deep or heavily textured surfaces where overboarding is not appropriate. For Filton properties built or renovated before 2000, we advise asbestos testing before removal work starts.

Artex and asbestos in Filton

Filton’s 1930s, 1940s and 1950s properties are well within the pre-2000 window where Artex may contain chrysotile (white asbestos).

Overboarding, where appropriate, avoids any asbestos concern by sealing the Artex beneath rather than disturbing it.

B&D Plastering does not carry out asbestos removal. We advise on testing requirements before any removal work begins on pre-2000 properties.

Re-skimming and Skimming

Re-skimming is a regular job across all of Filton’s property types. In older properties, it brings tired or cracked skim coats back to a smooth finish. In the modern Charlton Hayes properties, it is most commonly required following wallpaper removal, renovation work, or extension finishing. A fresh skim coat over a sound surface is one of the most cost-effective improvements a homeowner can make to a room.

  • Walls only, ceiling only, or full room
  • Over existing plaster where the surface is intact
  • Over fresh plasterboard following extension or renovation work
  • Over repaired areas for a consistent finish throughout

Full Replastering

Full replastering is particularly relevant to Filton’s older inter-war housing stock. The 1930s and 1940s semis were typically built with sand and cement backing plaster on brick walls, and in many cases that original plaster is now approaching 80 to 90 years old. Where it has cracked consistently across a wall, sounds hollow when tapped, or has begun to pull away from the brickwork, a full replaster is the right course of action.

For these properties, correct preparation and backing coat selection is critical. Sand and cement backing plaster that is still sound can often be prepared and skimmed directly. Where it has failed, we hack off back to bare brick and apply a fresh hardwall or bonding coat as appropriate before skimming. We assess and specify correctly for every property.

Ceiling Repairs

We repair damaged ceilings throughout Filton, from cracks and sagging sections in older plaster ceilings through to water-damaged plasterboard in newer properties. Common causes include slow leaks from above, damage during loft insulation work, and general deterioration in older plaster ceilings over time. We leave every ceiling sound and ready for decoration.

Patch Repairs

We carry out patch repairs across Filton for cracks, holes, blown sections and damage from other trades working through walls and ceilings. We match the surrounding finish as closely as possible and give each repair the same attention as a full job. No job is too small.

Internal Rendering

Internal sand and cement rendering provides a durable, level surface on brick and blockwork walls before finishing plaster is applied. It is commonly used in garage conversions and extensions, and on walls following damp treatment where a stable, salt-resistant base is required before the finish skim. We use quality rendering materials appropriate to the surface and purpose.

Filton’s Housing Stock: From 1930s Semis to Charlton Hayes

Filton’s housing tells a story of nearly a century of construction, and that breadth of property types matters directly for plastering. Very few areas in South Gloucestershire present the range that Filton does, and it is what gives experienced local plasterers a real advantage over generalists working across a wider area.

Plastering and Rendering

1930s and 1940s inter-war semis:

The defining property type across much of Filton, built during the rapid expansion of the town as the workforce at Filton aerodrome and the Bristol Aeroplane Company grew. These properties share specific plastering characteristics: sand and cement backing plaster on brick, higher ceilings than post-war housing, and widespread Artex from 1970s and 1980s renovations. In the oldest properties, original plaster is approaching 80 to 90 years old and is often showing consistent signs of failure.

1950s, 1960s and 1970s properties:

A second wave of Filton housing, built to continue accommodating aerospace industry growth. These properties have backing plasters from this period, many of which are still performing adequately but may require targeted repair or full replacement in areas affected by age or water. Artex ceilings are common across this era.

Charlton Hayes:

The development on the former Filton Aerodrome site represents a completely different end of the spectrum. Modern plasterboard and skim construction, built primarily from 2010 onwards. Main plastering needs are re-skimming after wallpaper removal or renovation work, patch repairs, and extension finishing. The approach is entirely different from the inter-war stock, and we adjust accordingly.
This range is precisely why a site assessment before specifying materials matters. We do not treat a 1935 Filton semi the same way we treat a Charlton Hayes new build, because the substrates, the age, and the likely causes of any problems are entirely different.

About B&D Plastering, Your Filton Plasterer

BD plastering white transit

When you need plasterers in Filton who understand the full range of properties across the area, B&D Plastering brings the experience to handle both ends of the spectrum correctly. Dave is British Gypsum certified with many years of experience across Filton, Patchway, Bristol and South Gloucestershire.

  • British Gypsum certified, quality materials used and specified correctly for every substrate
  • Fully insured, up to £5 million public liability cover
  • 5-star rated on Google and Facebook
  • Free, no-obligation written quotes
  • Available Monday to Saturday, 7am to 8pm
  • Residential and commercial work welcome

Frequently Asked Questions Plasterers in Stoke Gifford

Do you cover Charlton Hayes as well as the rest of Filton?
Yes. We cover Charlton Hayes and the whole of Filton, along with neighbouring areas including Patchway, Stoke Gifford and Bradley Stoke. There is no additional travel charge for anywhere within our regular service zone.
My 1930s Filton semi has sand and cement plaster on the walls. Can you skim directly over it?
It depends on the condition of the existing backing plaster. Where the sand and cement is still sound and well bonded to the brickwork, it can often be prepared with a suitable bonding agent and skimmed over directly. Where it has cracked, sounded hollow, or begun to pull away from the wall in places, we recommend hacking off and replastering correctly. We always assess on site first and give you our honest view before recommending any course of action.
How do you approach Artex on a 1930s or 1940s Filton property?
We assess each ceiling on its own merits. In many Filton inter-war properties, Artex was applied directly to the original plaster ceiling, in which case overboarding with fresh plasterboard and re-skimming is often the cleanest solution. For lighter textures, skimming over the Artex is sometimes viable. Full removal is the right approach for very deep or uneven textures. For any Filton property where Artex removal is under consideration and the property pre-dates 2000, we advise asbestos testing before work begins.
Do you work on new build properties in Charlton Hayes? I need plasterers in Filton for an extension.
Yes. We work on Charlton Hayes properties regularly, from re-skimming after renovation or wallpaper removal through to plastering extensions and finishing loft conversions. Modern plasterboard construction is straightforward to work with and we fit around other trades if you have a larger project running. Contact us early in your project so we can advise on the best timing for plastering within your overall programme.
My Filton property needs a full replaster. How long will it take and when can I redecorate?
A single room full replaster typically takes one to two days for the plastering itself, depending on room size and the extent of preparation required. After that, allow three to five days minimum for the fresh plaster to dry before applying the first coat of paint. For a whole property replaster, we discuss a realistic programme when we visit to quote. The plaster should be a consistent pale cream colour throughout before you start decorating.

See Also

Plastering Patchway | Plastering Bradley Stoke | Plastering Stoke Gifford | Damp Proofing Patchway (coming soon) | Plastering Bristol

Free plastering quote in Filton, call 07754 246 461

B&D Plastering, Stoke Gifford, Harry Stoke, Lyde Green, Emersons Green, bdplaster@hotmail.com, Mon to Sat 7am to 8pm
Contact US

Services

Specialist Damp Proofing, Condensation & Mould Prevention, All aspects of plastering and rendering including reskimming of Artex ceilings, plaster boarding, bonding, hardwall, wall plastering, ceiling plastering and more

Plastering Bristol Areas Covered

For all your plastering and rendering needs

Including Bristol, South Gloucestershire, Kingswood, Bradley Stoke, Yate, Thornbury, Stoke Gifford, Patchway, Filton

Damp Proofing Bristol Areas Covered

For all your damp proofing needs

Including Bristol, Clifton, Redland, South Gloucestershire, Kingswood, Bradley Stoke, Yate, Thornbury, Stoke Gifford, Patchway, Filton

Find Us

Bradley Stoke Journal

Bradley Stoke Matters

Bradley Stoke

Thornbury

Contact B&D Plastering

Terms and Conditions

FreeIndex
my builder
zoominfo logo
FreeIndex
my builder
zoominfo logo

© 2026 B&D Plastering - Website built & hosted by 29 design Ltd